- Contact Person : Mr. Peng Anbo
- Company Name : Guangzhou DeviceGate Technology Co., Ltd.
- Tel : 86-20-82317786
- Fax : 86-20-82317785
- Address : Guangdong,GuangZhou,Room 4032,HaoJing Building,No.9 DaGangGongYe Road,ChePi,TianHe
- Country/Region : China
- Zip : 510660
SBC1250 Embedded single board computer based AU1250
SBC1250 is a embeded single board computer based au1250 MPU by DeviecGate Co.,LTD.
SBC1250 is a Ready-to-Use Single-Board-Computer (SBC) designed to enable developers to quickly create the next generation of small, embedded, multi-functional products, such as IPTV-STB, network video player, home media gateway, POS terminals, KIOSK, automotive, navigation devices, industry panel PC and acquisition terminals. The board incorporates a high performance RMI Alchemy AU1250 processor, DDR2 SDRAM and an extensive set of interface controllers, provides high-performance computing power and unique multimedia support (MPEG1, MPEG2, MPEG4, WMV9, DIVX, H.264, RM, RMVB decoding at full D1 30fps) at low power consumption.
SBC1250 specification
CPU | CPU | Au1250@400MHz / 500 / 700MHz | |
NOR Flash | 512KB with bootloader pre-installed | ||
DDR SDRAM | DDR-2, 128MB | ||
RTC | CPU Built-in Real Time Clock, Battery backed | ||
Peripherals | Audio | Microphone In | Mono |
Line Out / Headphone | 3.5mm Jack, Stereo output | ||
Amplifier | On-board 2W x 2ch, stereo output to 2 speakers | ||
Video out | LCD | TTL Interface for 18bit TFT LCD panels | |
Single & Dual channel LVDS Interface for 18/36bit or 24/48bit TFT LCD panels. | |||
VGA | DB-15 VGA port | ||
Backlight Control | On-board backlight control interface, with ON/OFF and Brightness control | ||
Resolution & Frame rate | Supports 4.3” to 20”plus LCD panels, from 320x240 to 1280x1024 resolution, resolution & frame rate configurable through 6bit jumpers, All resolutions support full screen video playback | ||
USB | Host | 4 ports. USB2.0 High speed (480Mbps). compatible with USB 1.1 | |
Storage | SD Card | 1 x microSD card slot, used like one IDE disk on PC, support SDHC up to 32GB | |
USB-disk | USB expansion | ||
Network | 10/100Mbps | 1 x RJ45 port, with Link/Act LED indication | |
802.11bg WiFi (optional) | USB Wifi dongle | ||
GPRS / CDMA1x (optional) | UART TTL expansion | ||
GPS (optional) | UART TTL expansion | ||
Blue-tooth (optional) | USB expansion | ||
HSDPA (optional) | USB expansion | ||
Serial Ports | UART with HW flow control | 1 x DB9 Jack, standard RS232, or 1 x 6-pin Header TTL signal level, can be used for GPRS/CDMA1X modems, GPS modules etc | |
I2C | I2C header for Sensors or GPIO expansion | ||
Human Input | Touch Screen | On-board 4-wire / 5-wire(optional) resistance touch screen controller | |
Keypad | On-board 8 x 8 Keypad controller | ||
Remote controls | Universal infrared remote control receivers, up to 128 buttons, POWER_ON/OFF button supported. For custom keymap, please contact us. | ||
Keyboard / Mouse | USB expansion | ||
LEDs | Indication LEDs | 1 x Dual color (Red/Green) Power/Boot status indication LED, can be control by user application; 1 x Ethernet activity indication LED 1 x Card activity indication LED | |
Expansion | Daughter Card (optional) | On-board 4 fixing holes for user customized add-in card | |
Sensors (optional) | On-board Sensor header for user Sensor add-in module, such as IR detection. | ||
Debug & Maintenance | Debug Port | 3-wire RS232 Debug Port | |
Ethernet | 10/100Mbps connection, KITL supported | ||
Boot Mode | Booting from the following 3 sources, selectable by jumpers CLIMicroSD card(default)Ethernet | ||
Reset button | 1 x Reset button | ||
LED | On-board indication LEDs | ||
Power | 12V DC-Input | 5W max for spare board. | |
Mechanical | Size | Standard 3-inches industry computer, 146mm(L) x102mm(W) x 25mm(H) | |
SBC1250 Advantages
ü SBC1250 has industry standard 3.5 inch small form factor, can be easily used in space conservative environments.
ü 400-700MHZ CPU, DDR2 SDRAM, high performance experience
ü Innovative Micro-Drive technologies, using the microSD card like a hard disk on PCs. Users only put the boot logo(logo.bmp) and WinCE OS image(NK.bin) in the microSD card to make the board a windowsCE powered computer, this also make field and remote maintenances very convenient.
ü On-line NK.bin and boot logo upgrading supported
ü Both of single and dual channel LVDS output supported. Dual channel LVDS is dedicated for 17”plus LCD panel
ü 320x240 to 1280x1024 resolution, resolution & frame rate configurable through jumpers
ü built-in 8x8 keypad and IR receiver
ü 802.11bg WiFi total solutions
ü Hive based registry is ready.
SBC1250 Embedded single board computer based AU1250
